Specialist
Solution
Product
Document
Picture
Permanent graffiti protection, oil, water and stain repellent
  • Super AntiGraffiti Guard® is an innovative anti-graffiti product. This single-component, ready-to-use product provides long-term protection for a wide variety of supports against graffiti or tags of all kinds (paints, inks, felt-tips, markers etc) as well as posters, adhesives and stains.
  • Super AntiGraffiti Guard® provides permanent protection for the surfaces treated. It can resist several dozen cleans and therefore does not need to be reapplied after graffiti is removed.
  • Graffiti is cleaned using nothing but clear water, preferable to a high-pressure cleaner (100 bars) without addition of chemical cleaning products. 
  • For recent graffiti, using a simple cloth soaked in water may suffice.
  • Permanent protection against graffiti and posters.
  • Cleans graffiti using water, without special remover.
  • Protects against water, hydrocarbons, grease and organic products.
  • Gives the support a brilliant shine.
  • Resists to abrasion and excellent durability with UV rays.
  • Tested and approved by the RATP (French train).
Apply using an Airless atomiser or short-nap lacquer roller, completely dry.
Clean tools and equipment used with white spirit immediately after use.
  • Apply the product to a clean, dry surface free of dust and grease (moisture content less than 5% by mass).
  • The conditions of application and of preparation of supports must comply with DTU 59.1.
  • Super AntiGraffiti Guard® is ready to use: do not mix or dilute with another product.
  • Carry out a preliminary test on a small area.
  • Apply the product in one layer.
  • Do not apply too thickly. 
  • Period for use of product after opening: 12 hours.
  • Drying protected: 4 hours.
  • Optimal efficiency reached after 24 hours.
  • Physical state at 20°C: Viscous liquid.
  • Colour: Colourless.
  • Odour: Characteristic.
  • pH: Not applicable.
  • Flash point: 54°C.
  • Boiling point [°C]: Not applicable.
  • Density: 0.9 ± 0.05.
  • Water solubility [vol/vol]: Not applicable.
  • COV: < 480 g/l.
Consumption depends on the porosity of the material. 
The following values are given for information:
150 to 250 g/m².
Bucket of 5kg. 
  • Store in a dry place at a temperature between 5°C and 30°C.
  • Storage: 12 months from date of manufacture, in original packaging unopened.
  • Domestic stains can be cleaned using high-pressure clear water.
  • Graffiti can be cleaned using a cold-water high pressure cleaner (100 bars) or by brushing with a water-soaked cloth for fresh graffiti.
  • Only treat surfaces previously cleaned of all atmospheric pollution and stains.
  • Do not apply to non-porous surfaces such as glass or unpainted metal.
  • Hardens on contact with water and moisture; protect the product.
  • For perfect application and effective protection, Super AntiGraffiti Guard® must be used when the temperature of the supports is between 10°C and 30°C. 
  • Do not apply in rainy, very hot or very windy weather. Temperature between 10°C and 30°C.
  • The use of the usual protective equipment is essential when the product is applied by atomisation. Always handle the product in a well aerated area.
  • Do not dilute or mix with another product.
  • Respiratory protection: Wear an ABEK-type mask.
  • Protection of hands: Wear fluoride rubber gloves.
  • Protection of skin: Wear suitable safety clothing.
  • Protection of eyes: Wear hermetic protective goggles (ref. standard EN 166).
  • If swallowed: Do not induce vomiting. Contact a doctor or specialist.
PROFESSIONAL PRODUCT
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
 
Accessing: 76
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
Total online: 1.665.251
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other