Specialist
Solution
Product
Document
Picture
Plant stripping oil with Ecolabel
  • D’MouldGuard® Eco is a next-generation solvent-free, CMR-free vegetable oil emulsion.
  • D’MouldGuard® Eco is designed for the delayed mould release of all kinds of white or coloured concretes (including architectural, fibre-reinforced, high-performance and other concretes).
  • D’MouldGuard® Eco makes light work of mould release and results in a high-quality surface appearance with a uniform colour.
  • D’MouldGuard® Eco is an ecological water-based product formulated with renewable plant-derived raw materials. It is petroleum solvent-free and low in VOCs. It is completely safe for the health of users and the environment and is ECOLABEL-certified by AFNOR.
D’MouldGuard® Eco can be used onsite, in precast concrete factories... on shutterings in metal, treated wood or phenolic resin-faced plywood, matrix (elastomer, polyurethane or polystyrene).
  • Very high quality of the concrete.
  • Very easy release.
  • Water-based emulsion, solvent-free, CMR-free and odourless.
  • To be used pure or diluted (1 volume of product with 2 volumes of water).
  • Safe to use.
  • Exists in summer or winter version.
Apply with a low pressure sprayer or a cloth.
Clean tools and equipment immediately after use with water.
  • Use the product neat or diluted up to 1 volume of product with 2 volumes of water. In case of dilution, thoroughly mix the product and use it within 48 hours.
  • Apply the product sparingly on a clean surface with a cloth or a low pressure sprayer (2,5 bars minimum) with hollow cone nozzles.
  • Do not over apply the product (risk of aesthetic or adherence alteration). Eliminate any excess with a cloth or a squeegee.
  • Clean formworks after every demolding.
  • Wait 15 days at 20°C before applying any coating on the demoulded concrete (see French norm DTU 26.1).
  • Physical state at 20°C: Liquid.
  • Colour: White.
  • Odour: None.
  • pH: 7± 0.5.
  • Boiling point [°C]: 100°C.
  • Density : 0.98 ± 0.01.
  • Solubility in water [vol/vol]: Totale.
The following values are for guidance only: 40 to 50m2/litre.
5, 20 and 220 litres.
  • Keep in a dry place (between 5°C and 30°C).
  • Storage: 12 months following the production date when kept in the original unopened container.
Environment-friendly product:
  • Water-based product.
  • Solvent free.
  • Safe and non toxic.
  • 100% biodegradable.
  • VOC < 1 g/l.
  • Do not treat surfaces until they have first been cleaned of all atmospheric pollution and all stains.
  • D’MouldGuard® Eco is not recommended to protect formworks or site equipment.
  • Respiratory protection: Under normal conditions of use where adequate ventilation is available, no special respiratory protection equipment is needed.
  • Hand protection: As a precautionary measure, wear nitrile gloves.
  • Skin protection: No special protective clothing or skin protection is required under normal conditions of use.
  • Eye protection: If there is a real risk of splashing, wear protective goggles.
  • If swallowed: Do not induce vomiting. Contact a doctor or a specialist.
KEEP OUT OF THE REACH OF CHILDREN.
Chemical nature
Water-based emulsion formulated with plant-derived raw materials.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 81
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
Total online: 1.665.275
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other