Specialist
Solution
Product
Document
Picture
Destruction of green deposits, lichens, fungi and algae on roofs, facades and floors
Guard® Anti-M 24 is a preventive and curative treatment with a long-lasting action.
Curative:
Guard® Anti-M 24 destroys all parasitic vegetation, which is then washed away by the rain or simply brushed off.
Preventive:
The active ingredients of Guard® Anti-M 24 are fixed into the substrate. They limit the proliferation of mould and make it more difficult for parasitic plants to germinate.
Guard® Anti-M 24 does not contain chlorine or organic solvents. It replaces the common acid and alkaline cleaners, which are always harmful to substrates, and is harmless to treated surfaces (does not change color).
Guard® Anti-M 24 has residual effects that last for 1 to 3 years after application (depending on the type of material and exposure).
  • Guard® Anti-M 24 is applied outdoors to all types of material, including terra cotta, slate, concrete, natural stone, asphalt, surfacing, wood, composite or synthetic materials, glass, fabrics, etc.
  • Guard® Anti-M 24 is totally universal. It can therefore be used to treat roofs, walls, balconies, fountains, monuments, fences, railings, decking, flagstones, boat hulls, awnings, tennis courts, etc.
  • Strong penetrating power.
  • Residual effects.
  • Colourless, does not modify the appearance of the substrate.
  • Non-flammable.
  • Aqueous phase product.
  • Chlorine-free, nonylphenol-free and acid-free.
  • Easy to use.
Apply using a low pressure sprayer.
Clean tools and equipment immediately after use with water.
If the parasitic vegetation is very thick, brush before application.
Curative application:
  • Guard® Anti-M 24 is ready to use and is applied neat.
  • Shake the product well before use.
  • Always carry out a preliminary test.
  • Apply in dry weather to a dry or slightly damp substrate, spraying until substrate is saturated.
  • Allow to act for 10 to 15 days. NB If applied in cold weather (below 10°C), the cleaning action will take longer.
  • Residues can be brushed off, or left to the elements to remove.
  • If it rains during the 48 hours following treatment, the product may become diluted and may have to be renewed.
Preventive application:
  • When applied as a preventive treatment before painting, Guard® Anti-M 24 can be diluted to 1 volume of product for 1 volume of water and sprayed onto the substrate prior to painting.
  • Do not paint until substrate has been thoroughly dried.
  • Physical state at 20°C: Liquid.
  • Appearence: Light yellow.
  • Odour: Neutral.
  • pH: 7 ± 0.5.
  • Boiling point [°C]: Not applicable.
  • Density: 1.0 ± 0.01.
  • Solubility in water [vol/vol]: Total.
  • Flash point [°C]: Not applicable.
  • VOC: < 3g/l.
The following values are for guidance only: 5 to 6m2/litre.
5 and 20 litres.
  • Keep in a dry place (between 5°C and 30°C).
  • Storage: 2 years following the production date when kept in the original unopened container.
  • Guard® Anti-M 24 is a biocide. Use biocides with care. Before using, always read the label and the product information.
  • Prolonged skin contact with the product can cause burns. Wear gloves.
  • For ideal application and effective action, it is essential that Guard® Anti-M 24 be used when the temperature of the substrate is between 5°C and 30°C.
  • Do not apply during rain or in very hot weather. Air temperature between 5°C and 30°C.
  • Do not allow spray to fall on surrounding vegetation or on animal foodstuffs.
  • Do not mix with pond or fountain water. Thoroughly rinse off all residues before refilling ponds, fountains, swimming pools etc. with water.
  • Do not mix with any other product.
  • Respiratory protection: Under normal conditions of use where adequate ventilation is available, no special respiratory protection equipment is needed.
  • Hand protection: Wear sealed nitrile rubber gloves.
  • Skin protection: Protective clothing (protection and apron), boots.
  • Eye protection: CE-marked protective eyewear.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
KEEP OUT OF THE REACH OF CHILDREN
Chemical nature:
Mixture of quaternary ammoniums.
Prevention:
To prevent future soiling, it is recommended to protect the surface with a protection treatment from the ProtectGuard® or ImperGuard® range.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 87
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
Total online: 1.665.306
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other